詳細內容：TPEE Hytrel RS40F5 金龍先生15916816001 洽談Q Q：1362174071 TPEE Hytrel RS40F5 Hytrel® G4074 A 40 nom. Shore D, heat stable, plasticiser free resin for injection molding and extrusion. 熱穩定、增塑劑自由樹脂為注塑和擠壓。 Hytrel® G4774 A 47 nom. Shore D, heat stable, plasticiser free resin for injection molding and extrusion. 熱穩定、增塑劑自由樹脂為注塑和擠壓。 Hytrel® G5544 A 55 nom. Shore D, heat stable, plasticiser free resin for injection moulding and extrusion. 熱穩定、增塑劑自由樹脂為注射模塑和擠壓。 Hytrel® G5564 A 55 nom. Shore D, heat stable, plasticiser free resin for injection moulding and extrusion; low temperature impact resistance as well as excellent mechanical properties; good hydrocarbon resistance. 熱穩定、增塑劑自由樹脂為注射模塑和擠壓;低溫耐沖擊以及優良的機械性能,良好的烴阻力。 Hytrel® G3548L A 35 nom. Shore D, containing non-discoloring stabilizer, plasticiser free resin for injection molding and extrusion; with low temperature impact resistance as well as excellent mechanical properties. 包含穩定劑、增塑劑、不變色樹脂為注塑、擠出;與低溫耐沖擊以及優良的機械性能。 Hytrel® G4078W A 40 nom. Shore D, non-discoloring stabilizer, plasticiser free resin for injection molding and extrusion. 穩定劑、增塑劑、不變色樹脂為注塑和擠壓。 Renewably Sourced Resins可再生樹脂 Hytrel® RS 40F3 NC010 A high flow, low modulus grade containing at least 50% renewably sourced ingredients by weight. 一個高流動性、低模量等級至少含有50%的可再生原料按重量。Used in injection molding process.適用于注塑過程。 Hytrel® RS 40F5 NC010 A low modulus grade containing at least 50% renewably sourced ingredients by weight. 一個低模量等級至少含有50%的可再生原料按重量。thermoplastic processing techniques such as injection molding and extrusion.熱塑性塑料加工技術,如注塑和擠壓。 TPEE Hytrel RS40F5 TPEE在很多不同條件下，如在水霧、臭氧、室外大氣老化等條件下，化學穩定性優良。象大多數彈性體一樣，在紫外光作用下會發生降解，因此對于室外應用或制品受陽光照射的條件，配方中應添加紫外光防護助劑，其中包括炭黑和各種顏料或其它屏蔽材料;此外TPEE還具有不同程度的水解性。