詳細內容：產品基本信息： 型號：STABUTHERM GH 461 英文名稱:Kluber STABUTHERM GH 461 粘度等級：NLGI 品牌/產地：克魯勃，德國 包裝規格及價格：1KG/800 25KG/18000 類型：高溫潤滑脂 寶貝描述： STABUTHERM GH 461高溫潤滑脂 說明：STABUTHERM GH 461是一種高溫度潤滑脂基于礦物油/聚脲。它有寬工作溫度范圍可應用于軋制軸承運行速度高達溫度180 °C。完全適合潤滑中心潤滑系統，操作溫度高達200 C的可能。STABUTHERM GH 461功能高度有效的抗磨損性能并具有良好的承載因特殊能力EP添加劑。該油脂是非常粘合劑，是耐下靜態水和動態負載。STABUTHERM GH 461可耐氧化，耐極老齡化和提供可靠的保護，防止腐蝕。 應用：STABUTHERM GH 461適合在冶煉應用工程和軋機，尤其是高溫潤滑點通過提供一個中央潤滑系統，E. G.- 在連鑄機輥植物（板坯和方坯）- 在連續輸送機滾筒爐。對這類應用潤滑劑必須達到極高的設定的提出了要求工作溫度，脫屑，隨之而來的水和腐蝕。STABUTHERM GH461也適用于其他高溫, 如應用程序： - 退火爐，烘干爐。 - 滑動軸承鑄造起重機。 - 在紙板生產熱卷植物。 - 機器及設備玻璃和陶瓷工業。 - 關斷門散裝材料裝置。 - 冷卻床，輸送系統。 - 旋轉窯。。 包裝規格：1千克罐25千克桶180公斤桶裝。 德語： STABUTHERM GH 461 High-temperature lubricating greaseDescription: STABUTHERM GH 461 is a hightemperature lubricating grease based on mineral oil/polyurea. It has a wide service temperature range and can be applied in rolling bearings up to an operating temperature of 180 °C. In the case of total loss lubrication in central lubrication systems, operating temperatures up to 200 °C are possible. STABUTHERM GH 461 features highly effective anti-wear properties and has a good load-carrying capability due to special EP additives. The grease is very adhesive and is resistant to water both under static and dynamic load. STABUTHERM GH 461 is resistant to oxidation, extremely resistant to ageing and provides reliable protection against corrosion. Application: STABUTHERM GH 461 is suitable for applications in smelting works and rolling mills, especially for hightemperature lubrication points supplied through a central lubrication system, e. g. – drive rollers in continuous casting plants (slabs and billets) – conveyor rollers in continuous furnaces. A lubricant for such applications must meet the extremely high requirements set forth by the operating temperature, scaling, water and ensuing corrosion. STABUTHERM GH 461 is also suitable for other high-temperature applications, such as: – annealing furnaces, drying stoves – sliding bearings in foundry cranes – hot rolls in cardboard manufacturing plants – machines and equipment in the glass and ceramics industries – shut-off gates in bulk material installations – cooling beds, conveyor systems – rotary kilns. Application notes: STABUTHERM GH 461 can be pumped through all common types of lubrication systems. Pipe friction values were determined in order to assess the pumpability in central lubrication systems. The results obtained at different temperatures are illustrated in diagrams 1 and 2 on the next page. Diagram 1 shows the resistance to pumping per meter of pipe with a diameter of 7 mm; diagram 2 shows the values of a pipe with a diameter of 16 mm. The pipe friction values were measured with the Shell DELIMON rheometer system. Pack sizes: 25 kg bucket 180 kg drumprefix = o ns = "urn:schemas-microsoft-com:office:office" STABUTHERM GH 461 High-temperature lubricating grease for rolling bearings High upper service temperature up to 180 °C in central lubrication systems up to 200 °C Good pumpability in all common central lubrication systems Not miscible with water, thus having only little impact on the cooling water circulation Good anti-wear properties High load-carrying capability Very good anti-corrosion properties Resistant to aggressive media Good sealing effect